How to Access PostgreSQL with Python

PostgreSQL is an amazing and modern Relational Database Management System (RDBMS). PostgreSQL is also an open source database. PostgreSQL is cross platform. You can install PostgreSQL on Windows, Mac OS and Linux very easily.

You can easily interact with PostgreSQL database with Python programming language. All you have to do is install the Python module psycopg2 with PIP and you are good to go.

In this article, I will show you how to access PostgreSQL database with Python on Linux. I am going to use Debian 9 Stretch as my operating system and Python 3 programming language. The PostgreSQL database version I am going to use is PostgreSQL 9.6. So Let’s get started.


You must have

  • Any modern Linux distribution such as Ubuntu/Debian/CentOS etc installed.
  • Python programming language installed.
  • PIP or PIP3 installed depending on the version of your Python.
  • PostgreSQL installed.

You can find many articles on that may help you set up PostgreSQL and install Python+PIP on your favorite Linux distribution. Just search for it.

Creating a PostgreSQL Database and User:

In this section, I will show you how to create a PostgreSQL database and user on Linux. We will be connecting to this database from Python later in this article.

First find out your login username with the following command:

$ whoami

As you can see, my login username is shovon. Yours will be different. Make sure you take a note of it as you will need it later.

Now start the PostgreSQL interactive terminal with the following command:

$ sudo -u postgres psql

The PostgreSQL interactive terminal should start.

Now create a PostgreSQL database pyapp with the following SQL command:

postgres=# CREATE DATABASE pyapp;

The pyapp database should be created.

Now you have to create a new PostgreSQL user. Also, make sure that the username is the same as your login username.

Make a new PostgreSQL user with the following SQL command:

postgres=# CREATE USER your_login_username WITH ENCRYPTED PASSWORD ‘your_password’;

NOTE: replace your_login_username and your_password with your own login username and password.

The PostgreSQL user should be created.

Now grant the newly created user all the privileges to the newly created database pyapp with the following SQL command:

postgres=# GRANT ALL ON DATABASE pyapp TO your_login_username;

All the privileges for the pyapp database are granted to your login user.

Now exit out of the PostgreSQL terminal with the following command:

postgres=# q

Now let’s see whether we can login to our newly created database pyapp using our login username with the following command:

$ psql –dbname=pyapp –password

Now type in the password that you set earlier for your PostgreSQL user and press <Enter>.

You should be logged in.

Installing psycopg2 with PIP and PIP3:

Now it’s time to install psycopg2 Python module.

If you’re using Python 3, then run the following command to install psycopg2:

$ pip3 install psycopg2-binary

If you’re using Python 2, then run the following command to install psycopg2:

$ pip install psycopg2-binary

psycopg2-binary PIP module should be installed.

Creating the Project Directory:

Now create a project directory, pyapp with the following command:

$ mkdir pyapp

And navigate to the directory with the following command:

$ cd pyapp

This is where I will create all the Python script to access PostgreSQL database.

Connecting to the PostgreSQL Database:

First, create a python program in your project directory.

Now type in the following lines and save the file.

Now run the script with one of the following command:

For Python 3:

$ python3

For Python 2:

$ python

As you can see, I am connected to the database.

Here on line 1, the psycopg2 module is imported. In line 4, psycopg2.connect() method is used to connect to the PostgreSQL database. A try-except block is used to catch errors if in case something goes wrong and connection to the database fails.

Executing SQL Commands:

In this section, I will create a simple table users using Python psycopg2

Type in the following code to a new Python script and save it.

Now run the script:

$ python3

As you can see, the table users is created.

With psycopg2, if you want to execute a SQL command, first you have to create a cursor.

On line 9, I created a cursor with conn.cursor() method and stored it to cur variable. Here conn is the variable where I stored the database connection from psycopg2.connect() method.

Then you execute SQL command with the cursor as cur.exec(“YOUR_SQL_GOES_HERE”), which I did on line 12-17 to create an users table.

If your SQL command makes changes to the database you’re connected to, then you have to call conn.commit() method to make the changes permanent as I did in line 19.

Inserting Data to PostgreSQL Database:

Now that you have users table ready, let’s insert some data into the table.

Create a new file into your project’s directory and type in the following codes and save the file.

Now run the Python script as follows:

$ python3

The data should be inserted.

As you can see in the PostgreSQL terminal.

In the script, line 12 cur.execute() method runs the SQL query to insert into the users table. The %s’s are replaced by the strings from the tuple, the second parameter of the cur.execute() method.

The first occurrence of %s is replaced by the first element of the tuple, the second %s is replaced by the second element of the tuple and so on. You can also mix data types if you want. For example, %d represents integer.

Fetching Data from PostgreSQL Database:

Now you can fetch the data that you inserted into the PostgreSQL database.

First create a new Python script and type in the following lines of code. Then save the file.

Now run the script with the following command:

$ python3

As you can see, the data I inserted is fetched. It’s returned as a tuple, which is kind of like an array.

In the script, everything is similar as in other scripts. Here, cur.fetchone() method is used to return the first row of the table. If you have many rows, then you can keep calling cur.fetchone() to iterate through the list. When all the rows are returned, cur.fetchone() will return None.

Thanks for reading this article.

Sandclock IDC thành lập vào năm 2012, là công ty chuyên nghiệp tại Việt Nam trong lĩnh vực cung cấp dịch vụ Hosting, VPS, máy chủ vật lý, dịch vụ Firewall Anti DDoS, SSL… Với 10 năm xây dựng và phát triển, ứng dụng nhiều công nghệ hiện đại, Sandclock IDC đã giúp hàng ngàn khách hàng tin tưởng lựa chọn, mang lại sự ổn định tuyệt đối cho website của khách hàng để thúc đẩy việc kinh doanh đạt được hiệu quả và thành công.
Bài viết liên quan

How to Install PostgreSQL on Debian

Debian is one of the most successful and independent linux operation system distributions and PostgreSQL is the same for...

PostgreSQL to Manage JSON

One of the many data types that PostgreSQL support is JSON. Since most of the web APIs communication uses JSON payload...

How to Install PostgreSQL on Ubuntu Linux: The Easy Way

PostgreSQL is a top ranked open source Relational Database Management System that was created in 1996 originally at the...
Bài Viết

Bài Viết Mới Cập Nhật

Hướng dẫn chuyển đổi windows server windows evaluation to standard và active windows server 2008 + 2012 + 2016 + 2019

How to Update Ubuntu Linux

Squid Proxy Manager cài đặt và quản lý Proxy Squid tự động trên ubuntu

Hướng dẫn cài đặt Apache CloudStack

Hướng dẫn ký file PDF bằng chữ ký số (chữ ký điện tử) và sửa lỗi mới nhất 2021 foxit reader